Standard Aluminum Extrusion L Angle

Product Name: Standard Aluminum Extrusion L Angle

It is a profile with a vertical cross-section and is used in various constructions. Aluminum corners are made from special alloys and are most commonly used in the construction industry. They are produced in two ways: fabric and print. This aluminum horn, like the others, has a standard marking that is usually inserted into the aluminum body of the horn.

As mentioned above, there are two production methods for aluminum corners: pressing method and fabric method. In the fabric method, right angles will be pulled from the production line. But in the pressed method, 6-meter sheets are used. In this way, they bend in the middle to form an angle and come in two types: flexible or masonry and simple corner. For your building we recommend Rosenberg Aluminum Angle or Aluminum Angle, which is one of the best types of Aluminum Angle in the country.

The advantages and properties of horns are many, which is why it is often used in today's society. Aluminum corners also fall into this category, and their advantages are as follows.

1. One of the most important advantages of aluminum corners is light weight, which makes transportation easier.

2. Has a lot of power, especially in weather and physical conditions

3. Aluminum corners can be welded well.

4. This aluminum angle has very good corrosion resistance, fragility resistance and decay resistance.